Remove the fan.
3.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
To replace the component, reverse the removal procedure.
Hard drive backplane
To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove all hot-plug hard drives
4.
Disconnect the SAS cable from the hard drive backplane.
5.
Do not operate the server for long periods with the access panel open or removed.
rack" on page 25).
("Access
panel" on page 30).
("Hot-plug SAS hard
("Remove the server from the
drive" on page 31).
Removal and replacement procedures 37
rack" on page 27,
"Extend the