Hot-Plug Power Supply Calculations; Cd-Rom Drive Specifications - HP ProLiant DL385 G5p Maintenance And Service Manual

Rated steady-state power
Maximum peak power
System input requirements information is based on measurements with hardware available at the time of publishing this
document. For updated information, visit the HP website (http://www.hp.com/servers/powercalculator).

Hot-plug power supply calculations

For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Configurator website (http://h30099.www3.hp.com/configurator/).

CD-ROM drive specifications

Specification
Disk formats
Capacity
Block size
Dimensions
Height
Depth
Width
Weight
Data transfer rate
Sustained
Burst
Access times (typical)
Full stroke
Random
Diameter
Thickness
Track pitch
Cache/buffer
Startup time
Stop time
Laser parameters
Type
Wave length
800 W at 100V AC input
900 W at 120V AC input
1200 W at 200V to 240V AC
input
800 W at 100V AC input
900 W at 120V AC input
1200 W at 200V to 240V AC
input
Value
CD-ROM (modes 1 and 2); mixed mode (audio and data combined); CD-DA; Photo
CD (single/multiple-session), CD-XA ready; CDi ready
550 MB (mode 1, 12 cm)
640 MB (mode 2, 12 cm)
2368, 2352 bytes (mode 0)
2352, 2340, 2336, 2048 bytes (mode 1)
2352, 2340, 2336, 2048 bytes (mode 2)
12.7 mm (0.50 in)
132.08 mm (5.20 in)
132.08 mm (5.20 in)
0.34 kg (0.75 lb)
150 KB/s (sustained 1X), 1500/3600 KB/s (10X to 24X)
16.6 MB/s
300 ms
140 ms
12 cm, 8 cm (4.70 in, 3.15 in)
1.2 mm (0.05 in)
1.6 µm (6.3 × 10 in)
-7
128 KB
< 10 s
< 5 s (single); < 30 s (multisession)
Semiconductor laser GaAs
700 ± 25 nm
Specifications 81