If you have previously performed Feed Adjustment, you will need to perform it again after
adjusting Media Tension. See "Feed Adjustment (manual)" on page 67.
1. Use the d/u buttons to select Feeding Tension and press the Z button.
2. Use the d/u buttons to select the item you want to change.
Selecting Auto
(1)
Select Auto and press the Z button.
(2)
Confirm that the checkbox has been selected and press the Z button.
(3)
Press the y button to return to the customize settings menu.
Selecting Manual
(1)
Select Manual and press the Z button.
(2)
Use the d/u buttons to set the recommended value.
(3)
After finishing the configuration, press the Z button.
(4)
Press the y button twice to return to the customize settings menu.
Take-up Tension
Take-up Tension has 2 settings: Auto and Manual.
The default setting of Auto is recommended in most situations. If creases appear during
printing or black bands (dark stripes) appear in the prints, set Take-up Tension to Manual.
When Manual is set, we recommend setting Take-up Tension to Lv3.
If you have previously performed Feed Adjustment, you will need to perform it again after
adjusting Take-up Tension. See "Feed Adjustment (manual)" on page 67.
1. Use the d/u buttons to select Take-up Tension and press the Z button.
2. Use the d/u buttons to select the item you want to change.
Selecting Auto
(1)
Select Auto and press the Z button.
(2)
Confirm that the checkbox has been selected and press the Z button.
(3)
Press the y button to return to the customize settings menu.
Selecting Manual
(1)
Select Manual and press the Z button.
(2)
Use the d/u buttons to set the recommended value.
Basic Operations
71