Epson SureColor F7170 User Manual page 44

See "Saving Settings" on page 66.
1. Select an option.
To print with current settings:
Use the d/u buttons to select Keep Settings Above and press the Z button.
Proceed to step 6.
To change settings:
Use the d/u buttons to select Change Settings and press the Z button.
2. Select the items you want to change and press the Z button.
3. Select the desired option and press the Z button.
4. Press the y button to display the dialog shown in step 2 and then press the y button
again.
5. After confirming that the settings are correct, use the d/u buttons to select Keep
Settings Above and press the Z button.
6. The roll type selection screen appears.
Use the d/u buttons to select the roll type that matches the loaded roll and press the
Z button.
7. If On is selected for Remaining Setup, you will be prompted to enter the length of the
current media. Use the d/u buttons to choose a length between 5.0 and 999.5 m (15
and 3000 feet) and press the Z button. You can set in 0.5 m increments. If the display
is in feet, lengths are given in increments of 1 foot.
The printer will display Ready after a brief pause, showing that it is ready to print. Transmit
the data to be printed from the computer.
Basic Operations 44