Epson SureColor F7170 User Manual page 17

3 M button (media setup button)
Press this button to display the Media Setup menu, which contains such items as Media Remaining, Select Media,
Customize Settings, and Print Media List. This button is disabled during printing.
See "The Media Setup Menu" on page 119.
4 Display
Displays the printer's status, menus, error messages, and so on. See "Understanding the Display" on page 18.
5 Menu button
Press this button to display menus. See "Using the Control Panel Menu" on page 114.
6 y button (back button)
Press this button to exit to the previous menu when options are displayed. See "Menu Operations" on page 114.
7 l/r buttons (left and right arrow buttons)
Use to position the cursor when performing such tasks as entering a Setting Name or IP Address in the setup menu.
8 u/d buttons (media feed buttons)
When media is loaded, you can press the d button to feed the media and the u button to rewind. Keep the d button pressed
to feed the media up to 103 cm (40.6 inches). Keep the u button pressed to rewind the media up to 25 cm (9.8 inches).
Note that when the u button is used to rewind, the media will stop when its edge reaches the starting print position. Rewind
can be resumed by releasing the button and then pressing it again.
When the menus are displayed, these buttons can be used to select menu items and options. See "Menu Operations" on
page 114.
9 OK button
Pressing this button when a menu item is highlighted displays options for the selected item.
Pressing this button when an option is highlighted selects the highlighted item or performs the selected operation.
When a warning alarm is sounding, press this button to stop the sound.
10 button
Pressing this button displays the Heating & Drying menu, where you can adjust the Heater Temperature.
11 # button (maintenance button)
Pressing this button displays the Maintenance menu, which contains such items as Nozzle Check, Cleaning, Head Washing,
Head Maintenance, and Waste Ink Counter. This button is disabled during printing.
See "The Maintenance Menu" on page 126.
Introduction 17