Epson SureColor F7170 User Manual page 34

If the label does not have a loading position, mark it on the label as instructed in the
Setup Guide.
Note:
Be sure the option selected for Roll Type in the Customize Settings menu matches how
the media is rolled. Roll Type defaults to Printable Side Out. Be sure to select Printable
Side In after loading media rolled printable side in.
For more information see "Roll Type" on page 70.
5. Raise the roll holder lever on the left side of the printer to lift the media into position,
then firmly insert the roll holder.
If the roll of media has an outer diameter which is less than 140 mm (5.5 inches), lift it
up by your hands, and place it on the roll holder. The roll core will not reach the holder
when raised using the roll holder lever.
6. Tighten the roll holder screw to fix the roll holder in place.
Basic Operations 34