Epson SureColor F7170 User Manual page 125

Item
Light
Medium
Heavy
Power
Cleaning Cycle
Heat Off Timer
Sleep Mode
Restore Settings
Parameter Explanation
Off/1 to 240 hours Choose the frequency—never (Off) or after 1 to 240 hours—and
strength with which the printer performs head cleaning. Periodic head
cleaning will not be performed while Off is selected. If a value between 1
and 240 hours is selected, auto head cleaning will be performed after the
specified number of hours. If printing is in progress or the printer is in
sleep mode when the specified time has elapsed, Periodical Cleaning will
only be performed after printing is complete or the printer is reactivated.
The following reset the timer:
Turning the printer on.
Choosing another option for this item.
Manually performing head cleaning using All Nozzles.
Note that even when Off is selected for Periodical Cleaning, the printer
will automatically clean the print head at a fixed interval after printing to
keep the nozzle from clogging.
Off Choose the frequency with which the printer performs auto head
cleaning: never (Off) or once every 1 to 10 pages. The cleaning cycle will
1 to 10 pages
not be performed while Off is selected. Select 1 to 10 to perform head
cleaning before the specified number of pages is printed.
15 to 240 minutes You can turn off the after heater automatically when no errors are
detected and no print jobs are in progress. This option is used to choose
the interval before the after heater turns off automatically.
The printer will enter sleep mode when the Heat Off Timer expires. In
sleep mode, the control panel turns off and the internal motors and other
components consume less power.
To reactivate the control panel display, press any button in the control
panel except the P button. The control panel display will, however, turn
off again if no operations are performed for another 30 seconds under
these conditions. The printer and heaters are only fully reactivated when
a print job is received, the media loading lever is used, or another
operation involving printer hardware is performed.
15 to 240 minutes The printer will enter sleep mode if no errors have occurred, no print jobs
have been received, and no actions are performed on the control panel
for an extended period of time.
This setting selects the amount o time until the printer enters sleep
mode.
Yes Select Yes to restore all items in the Printer Setup menu to their default
settings.
No
Using the Control Panel Menu 125