Epson SureColor F7170 User Manual page 50

2. After confirming that the media is loaded correctly, press the d button to feed the media
as far as the auto take-up reel unit roll core holder.
Important:
Always press the d button to feed the media as far as the roll core holder. If the media is
pulled by hand, the media may twist during take-up.
3. Loosen the roll core holder locking screws and adjust the roll core holders so that the
gap between the two is wider than the media.
Center the roll supports between the roll holders.
Important:
If the left roll core handle shaft is not visible, rotate the handle until it stops. The media can
not be properly loaded if the handle shaft is not visible.
Basic Operations 50