Epson SureColor F7170 User Manual page 51

4. Align the right roll core holder with the right edge of the media and tighten the locking
screw.
5. Insert the roll core onto the right holder.
6. Confirm the following: the left roll core holder is fully inserted into the roll core, and the
roll core and edges of the media are not misaligned.
Important:
If the edges of the media are misaligned, the media cannot be taken up correctly. To
correct misalignment, loosen the right roll core holder locking screw, and then restart from
Step 4.
7. To ensure that the roll core holder is inserted sufficiently, push the center section on the
side of the roll core holder towards the roll end.
Basic Operations 51