Monitoring Chassis Temperature; Monitoring Chassis Temperature Status; Temperature Errors - Alcatel-Lucent OmniSwitch 10K User Manual

Monitoring Chassis Temperature

Monitoring Chassis Temperature
The operating temperature of your switch is a critical factor in its overall operability. In order to avoid a
temperature-related system failure, your switch must always run at a temperature within the specified
operating temperature range. Refer to the
To avoid chassis over-temperature conditions, follow the important chassis airflow recommendations on
page 2-7.

Monitoring Chassis Temperature Status

To check the switch's current temperature status, use the
-> show temperature
Device | Current |
-------+---------+---------+--------+--------+-----------------
CMMA 45
CMMB 45
FABA 46
Slot1 43
Slot3 43
Slot4 43
Note: All temperatures are in Celsius.
For more information about this command, see the "Chassis Management and Monitoring Commands"
chapter in the OmniSwitch CLI Reference Guide.

Temperature Errors

The CMM monitors the chassis ambient air temperature at all times via an onboard sensor. If an over-
temperature condition occurs, there are two different levels of error severity:
Warning threshold has been exceeded
•
Danger threshold has been exceeded
•
page 2-26
page 2-3
Range | Danger | Thresh |
15-73 73
15-73 73
15-73 73
15-73 73
15-73 73
15-73 73
for more information.
show temperature
Status
68 UNDER THRESHOLD
68 UNDER THRESHOLD
68 UNDER THRESHOLD
68 UNDER THRESHOLD
68 UNDER THRESHOLD
68 UNDER THRESHOLD
OmniSwitch 10K Hardware Users Guide
Chassis and Power Supplies
command. For example:
August 2015