Os10K-Dc-2400; Led Status Descriptions - Alcatel-Lucent OmniSwitch 10K User Manual

Chassis and Power Supplies

OS10K-DC-2400

The DC power supplies are installed in the power supply bays of the chassis. See
diagram showing the power supply bays.
Model
Provides Chassis Power For:
Input Voltage Range
Input Frequency
Output Power
Ambient Temperature
Humidity

LED Status Descriptions

LED
DC INPUT OK
DC OK (Dual Color)
OmniSwitch 10K Hardware Users Guide
DC INPUT OK LED
DC Power Supply Front Panel
OS10K-PS-24D
OmniSwitch 10K
-36VDC to -72VDC
400KHz
2400W
-10 to 70 degrees Celsius (operating)
-40 to 85 degrees Celsius (non-operating)
30% to 95% Relative Humidity (Operating)
10% to 95% Relative Humidity (Storage)
State
Green
Off
Green
Red
Flashing Green/Red
August 2015
DC OK LED
Description
DC input is OK.
No (or very low) DC input is detected (e.g., the power
supply is not connected to a power source).
DC output is OK.
A power supply failure has been detected.
An over-temp error has been detected.
Power Supplies
page 2-4 for a slot
page 2-13