Chassis and Power Supplies
Removing a Power Supply
Before removing a power supply, unplug the power cord from its power source.
1
Free the power cord from the cord retainer clip and remove the cord retainer assembly from the power
2
supply by loosening the captive screw.
Unplug the power cord from the power supply socket.
3
Loosen the captive screw, located at the top-left of the power supply's front panel.
4
5
Rotate the handle 90 degrees to the open (horizontal) position.
OmniSwitch 10K Hardware Users Guide
August 2015
Chassis Power Budget
page 2-19