What is in this Manual?
This users guide includes the following hardware-related information:
Descriptions of "Availability" features.
•
Technical specifications for chassis, power supplies, Network Interface (NI) modules, and Chassis
•
Management Modules (CMMs).
•
Power supply requirements.
The dynamics of chassis airflow, including detailed illustrations of proper and improper airflow
•
configurations.
Hot swapping power supplies, fan trays, Chassis Management Modules (CMMs), Chassis Fabric
•
Modules (CFMs) and Network Interface (NI) modules.
•
Installation and removal procedures for power supplies, fan trays, Network Interface (NI) modules, and
Chassis Management Modules (CMMs).
Detailed illustrations and LED descriptions for power supplies, Network Interface (NI) modules, and
•
Chassis Management Modules (CMMs).
CMM redundancy.
•
Hardware-related Command Line Interface (CLI) commands.
•
What is Not in this Manual?
The descriptive and procedural information in this manual focuses on switch hardware. It includes
information on some CLI commands that pertain directly to hardware configuration, but it is not intended
as a software users guide. There are several OmniSwitch users guides that focus on switch software
configuration. Consult those guides for detailed information and examples for configuring your switch
software to operate in a live network environment. See
"Related Documentation" on page -xiii
for your switch.
How is the Information Organized?
Each chapter in this guide focuses on a specific hardware component, such as the Chassis Management
Module (CMM), or a set of hardware components. All descriptive, technical specification, and procedural
information for a hardware component can be found in the chapter dedicated to that component.
x
"Documentation Roadmap" on page -xi
for further information on software configuration guides available
OmniSwitch 10K Hardware Users Guide
and
August 2015