Problem
An error message remains,
even if misfed paper is
removed.
Original images are printed
on the reverse side of the
paper.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Causes
• When a misfeed
message appears, it
remains until you open
and close the cover as
required.
• Paper is still jammed in
the tray.
You may have loaded the
paper incorrectly.
The side or end fences of the
paper trays may not be set
properly.
Paper of undetectable size
has been loaded.
There is a foreign object on
the finisher tray.
When You Have Problems Operating the Machine
Solutions
Remove misfed paper, and then open
and close the cover. For details, see
p.75 "Removing Jammed Paper".
Load paper correctly. Load paper into
the paper tray with the print side down.
Load paper into the Wide LCT or multi
bypass tray with the print side up.
• Remove misfed paper. For details,
see p.75 "Removing Jammed
Paper".
• Check the side or end fences are
set properly. Also, check the side
fences are locked. For details, see
"Changing the Paper Size", About
This Machine
.
• Remove misfed paper. For details,
see p.75 "Removing Jammed
Paper".
• When paper is loaded which
cannot be detected automatically,
the user must set the paper size on
the display panel. For details, see
"Changing to a Size That Is Not
Automatically Detected", About
This Machine
.
• Remove misfed paper. For details,
see p.75 "Removing Jammed
Paper".
• Do not place anything on the
finisher tray. It may cause a paper
jam.
1
23