Stihl FSE 60 Instruction Manual page 23

5
Straighten out the nylon lines and
N
wind them tightly on to the spool –
one nylon line in each chamber.
Engage the ends of the lines in the
N
notches (2).
Assembling the mowing head
NOTICE
Check that the spring is installed (see
"Mounting the Mowing Head").
FSE 60
5
6
Thread the ends of the lines (6)
N
through the sleeves (7) and push
the spool (2) into the head so that it
snaps into position.
The nylon lines must disengage from the
notches (5) as the spool is pushed into
position.
Pull out the ends of the lines as far
N
as stop.
Mount the mowing head on the
N
machine.
2
6
7
English
21