Specifying E-Mail Settings; E-Mail Address; Registering Smb Destinations; Host Name/Ip Address - Konica Minolta bizhub C200 User Manual

User Settings / User Management / One-Touch/Box Reg.
Note
Relay stations must be registered in advance. For details, refer to
Relay Dest. Selection" on page
If settings have been specified for "SMTP Authentication User Name" and "SMTP Authentication
Password" on the relay station, the SMTP authentication user name and SMTP authentication
password must be specified on the machine sending the fax when the relay station is registered. For
details, refer to the User's Guide [Network Administrator].
8.4.9

Specifying E-Mail settings

The procedure for specifying E-Mail transmission settings is described below.

E-Mail Address

From the control panel, type in the e-mail address.
- Domain: If frequently entered domain names have been registered, the e-mail address can easily be
entered.
Note
For details on registering domain names, refer to
page 8-22.
8.4.10

Registering SMB destinations

The procedure for specifying SMB settings is described below.

Host Name/IP Address

Type in the host name or IP address for the destination computer.
- For a host name, type in up to 64 characters.
- To specify an IP address, touch [IP input], and then use the keypad to type in the IP address.

File Path

From the control panel, type in the path (up to 128 characters) to the folder where the file is to be saved.

User Name

From the control panel, type in the user name (up to 32 characters) for logging on to the destination computer.
C200
8-7.
"One-Touch/Box Reg. - Domain Name" on
"Default Settings - Fax/Scan - IP
8
8-18