Report Settings; Tx Report (G3/Ip/I-Fax/Relay/E-Mail/Ftp/Smb); Activity Report (G3/Ip/I-Fax/Relay/E-Mail/Ftp/Smb) - Konica Minolta bizhub C200 User Manual

Administrator Management settings
9.9

Report Settings

9.9.1

TX Report (G3/IP/I-FAX/Relay/E-mail/FTP/SMB)

The printing conditions for the results report can be specified. These settings can be changed during
transmission. (Default: "If TX Fails" for "Single Dest"; "If TX Fails" for "Broadcasting")
Select how the result report is printed according to the number of recipients.
ON: Select this setting to print the result report with each transmission.
If TX Fails: Select this setting to automatically print the result report only if the fax could not be sent.
OFF: Select this setting to not print the result report.
9.9.2

Activity Report (G3/IP/I-FAX/Relay/E-mail/FTP/SMB)

Select whether or not to automatically output the activity report with every 50 transmissions. (Default: ON)
C200
9
9-24