Transmitting data
Polling TX - Quality
For the setting procedure, refer to
Polling TX - Density
For the setting procedure, refer to
Polling TX - Reduction/Area
For the setting procedure, refer to
Polling TX - Settings of transmission
The following functions are available. For details, refer to the corresponding pages.
Polling TX - Background Adjustment
For the setting procedure,refer to
page
4-27.
Function
Sender
TX-Report
Stamp
2in1
2-Sided TX
Rotation TX
4.5.18
Application - Retrieve (G3)
A document on a bulletin board set up on the sender's machine can be sent with a command from the
recipient.
Select the method for specifying the sender, and then specify the sender.
Note
This function does not appear if the optional fax kit has not been installed.
C200
"Quality (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on page
"Density (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on page
"Reduction/Area (G3)" on page
"Background Adjustment (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on
Refer to
p. 4-28
p. 4-29
p. 4-31
p. 4-29
p. 4-29
p. 4-30
4-25.
4
4-23.
4-24.
4-36