Administrator Management settings
9
Administrator Management settings
9.1
Initial settings
9.1.1
G3 Fax
Before performing G3 fax operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page
RX Functions
Refer to
"Fax Settings - RX Functions (G3)" on page
9.1.2
Internet Fax
Before performing Internet fax operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page
Network Settings
Note
For details, refer to the User's Guide [Network Administrator].
9.1.3
IP Address Fax
Before performing IP address fax operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page
Network Settings
Note
For details, refer to the User's Guide [Network Administrator].
9.1.4
IP Relay
Before performing IP relay operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page
IP Relay Dest. Selection
Refer to
"Default Settings - Fax/Scan - IP Relay Dest. Selection" on page
Network Settings
Note
For details, refer to the User's Guide [Network Administrator].
C200
9-17.
9-17.
9-17.
9-17.
9-17.
8-7.
9
9-2