User Settings / User Management / One-Touch/Box Reg.
5
If an LDAP server has been registered to be searched, an address registered on the LDAP server can
be registered as a one-touch destination. Select whether or not the LDAP server can be searched.
–
If "ON" is selected, the LDAP server is accessed, the address to be registered is searched for, and
then continue with step 6. For details on performing the search, refer to
page
–
If "OFF" is selected, continue with step 6.
6
Type in the name of the recipient to be registered with the one-touch dial button, and then touch [Next].
–
The recipient name can contain a maximum of 24 characters.
7
Select the communication mode, and then touch [Next].
8
Specify the appropriate settings for the selected communication mode.
9
Check the information to be registered, and then touch [OK].
–
To change a setting, touch [↑] or [↓] until the appropriate screen is displayed.
–
A secondary recipient can also be registered, depending on the selected communication mode.
C200
4-14.
8
"LDAP Search" on
8-12