Rx Doc. Settings; Forwarding Dest; Remote Input Check - Konica Minolta bizhub C200 User Manual

Administrator Management settings

RX Doc. Settings

Specify how documents are managed.
- Print: Select this setting to immediately print the document once it is received.
- Forward: Select this setting to forward the received document to the specified recipient. A maximum of
210 forwarding destinations can be specified.
- Print & Forward: Select this setting to immediately print the document once it is received and forward
it to the specified recipient. A maximum of 210 forwarding destinations can be specified.
- Memory RX: Select this setting to save the received document in the created user box without being
printed.
Note
Print documents saved in user boxes from the Doc. tab of the Job List. For details, refer to
display and operations" on page

Forwarding Dest.

Specify a destination when "RX Doc. Settings" is set to "Forward" or "Print & Forward".
- To select a new destination, touch [Next Dest.], and then select the destination.
- To delete a registered destination, select it, and then touch [Delete].

Remote Input Check

If F-codes are used, select whether remote input checking is enabled or disabled.
C200
2-5.
9
"Job List
9-16