Loading The Imaging Film - Sharp UX-E800 Operation Manual

Loading the Imaging Film

Your fax uses a roll of imaging film to create printed text and images.
The print head in the fax applies heat to the imaging film to transfer
ink to the paper. Follow the steps below to load or replace the film..
The initial starter roll of
imaging film included with
your fax can print about 30
A4-size pages.
Note: If there is paper in the paper tray, pull the paper release plate
forward and remove the paper before loading the imaging film.
1
Open the operation panel by grasping
the finger hold and pulling up.
2
Pull the green release on the right side
of the machine forward, and open the
print compartment cover.
Loading the Imaging Film
When replacing the film, use a
roll of Sharp UX-3CR imaging
film. One roll can print about 95
A4-size pages.
17