Loading The Imaging Film - Sharp FO-885 Operation Manual

Loading the Imaging Film

Your fax uses a roll of imaging film to create printed text and images.
The print head in the fax applies heat to the imaging film to transfer
ink to the paper. Follow the steps below to load or replace the film.
The initial starter roll of
imaging film included with
your fax can print about
30 A4 pages.
Note: If there is paper in the paper tray, pull the paper release plate
forward and remove the paper before loading the imaging film.
1
Open the operation panel by grasping the finger hold and pulling up.
2
Pull the green release on the right side of the machine forward, and
open the print compartment cover.
Loading the Imaging Film
When replacing the film, use a
roll of Sharp FO-3CR imaging
film. One roll can print about
95 A4 pages.
17