Table of Contents
Advertisement
Making Telephone Calls
Comments:
♦ While the handset of the fax is lifted (off hook), an extension phone
connected directly to the fax cannot be used to speak with the other
party.
♦ The fax may interrupt a voice call received on an extension phone if
the reception mode is set to A.M. and there is a period of silence
during the conversation. If you are on a touch-tone phone, you can
prevent this by pressing any three keys on the phone immediately
after you answer. (Note: Do not enter the code to activate fax
reception: 5, * , * .)
Chain Dialling
After lifting the handset, you can dial any combination of Normal
Dialling, One Touch Dialling and Speed Dialling numbers. For
example, if you have stored an area code or an access code for a
special service in a One Touch Dial key, you can press the One Touch
Dial key for that area code or access code, then dial the remainder of
the number by pressing a One Touch Dial key, pressing number keys,
or pressing the SPEED DIAL key and entering a two-digit Speed
Dial number.
Searching for an auto-dial number
You can use the HOLD/SEARCH key to search for a One Touch Dial
key or Speed Dial number. First search for the number as described in
Searching for an auto-dial number on page 110, then pick up the
handset or press the SPEAKER key. The number will be dialled
automatically (do not press the START key).
Redial
The last number dialled can be redialled by pressing the REDIAL key
(it is not necessary to pick up the handset or press the SPEAKER
key). When the other party answers, pick up the handset to talk.
130
Advertisement
Table of Contents
