Disk Problem - Lexmark C925 User Manual

Touch Format disk to reformat the printer hard disk and clear the message.
Note: Formatting deletes all the files stored on the printer hard disk.
Disk near full. Securely clearing disk space.
Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
•
Delete fonts, macros, and other data stored on the printer hard disk.
•
Install a hard disk with higher capacity.

Disk problem

The printer hard disk must be reformatted.
Touch Format disk to reformat the printer hard disk and clear the message.
Note: Formatting deletes all the files stored on the printer hard disk.
Error reading USB drive. Remove USB.
An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.
Insert Tray [x]
Insert the specified tray into the printer.
Install Tray [x]
Try one or more of the following:
•
Install the specified tray:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
Load [src] with [custom type name]
Try one or more of the following:
• Load the specified paper in the tray or feeder.
•
Touch Paper loaded, continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default paper source.
•
Cancel the print job.
Troubleshooting
177