Cannot Detect Flash Memory Card; Cannot Detect Printer Hard Disk; Internal Solutions Port Does Not Operate Correctly; Internal Print Server Does Not Operate Correctly - Lexmark C925 User Manual

R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
M
AKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY
If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not
be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that
came with the paper tray, or go to http://support.lexmark.com to view the paper tray instruction sheet.

Cannot detect flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Cannot detect printer hard disk

Make sure the printer hard disk is securely connected to the printer system board.

Internal Solutions Port does not operate correctly

Try one or more of the following:
C I S
HECK THE NTERNAL
Make sure the ISP is securely connected to the printer system board.
C
HECK THE CABLE
Make sure you are using the correct cable and that it is securely connected to the Internal Solutions (ISP) port.
M
AKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY
For information on installing the network printing software, see the Networking Guide on the Software and
Documentation CD.

Internal print server does not operate correctly

Try one or more of the following:
C
HECK THE PRINT SERVER CONNECTIONS
•
Make sure the internal print server is attached securely to the printer system board.
•
Make sure you are using the correct cable and that it is securely connected.
P (ISP)
OLUTIONS ORT CONNECTIONS
Troubleshooting
193