Sharp LC-52XS1E Service Manual page 46

LC-52XS1E/RU/LC-65XS1E/RU
6) When all processing ends, the upgrade end screen is displayed as shown in the figure below.
The version of new software can be checked on this screen.
The version display is displayed to complete the upgrade of the item of the object respectively.
Program Version: The version of main software is displayed.
7) AC power supply of a main body is turned off (AC outlet is pulled out), and the USB memory for upgrade is removed.
8) Rewriting of software is an end above.
* Check the version of the main software from 1/46 screens of the process adjustment screen by starting the set after rewriting software.
<UPGRADE SUCCESS>
PROGRAM1
100%
OK NG EEPROM
PROGRAM2
100%
OK NG
Program
1.00 (W 2008/05/12 1)
System
W0805121
<UPGRADE SUCCESS>
MONITOR
57%
OK NG
<UPGRADE FAILURE>
MONITOR
57%
OK NG
<UPGRADE SUCCESS>
MONITOR
100%
OK NG
Monitor
1.00
3 – 23
SHOWA
OK NG
SHOWA
SHOWA
SHOWA