Sharp LC-52XS1E Service Manual page 43

When power button on the main unit is pressed
No Power off by power button.
* The OSD display is an example.
If another ODS is previously displayed, the status is reset (MENU or similar).
2. Volume Maximum Level [MAXIMUM VOLUME]
Selection 0~60 (Loop is not provided.)
Default 60
Function •
Exception
Remarks •
•
3. Volume Fixed [VOLUME FIXED]
Selection "VARIABLE" or "FIXED" is selectable. (Loop is provided.)
Default "VARIABLE"
Function It is selectable whether or not the volume is fixed to the value adjusted in the volume fixed level mode.
(Only the speakers of the main unit)
Exception •
Keys disabled when not •
set to Default •
Remarks •
•
•
4. Volume Fixed Level [VOLUME FIXED LEVEL]
Selection 0~60 (Loop is not provided.)
Default Currently set volume
Function The volume is fixed to the adjusted value. (Only the speakers of the main unit)
Exception •
Keys disabled when not
set to Default
Remarks •
•
No Power off by power button. No Power off by remote control.
5. R/C Operation [RC BUTTON]
Selection "RESPOND" or "NO RESPOND" is selectable. (Loop is provided.)
Default RESPOND
Function R/C key operation is set.
When set to "NO RESPOND", the R/C keys are disabled in the ordinary mode.
The power key (Power ON/Standby Key) is also disabled.
Exception •
•
Remarks The CARD function stops all functions including the input switching and direct key when set to "NO RESPOND".
6. Main Unit Operation [PANEL BUTTON]
Selection "RESPOND" or "NO RESPOND" is selectable. (Loop is provided.)
Default RESPOND
Function NO RESPOND: Excluding power supply (Video/Standby key), the main unit keys are disabled.
Exception •
•
Even if VOL is adjusted to a value higher than the adjusted one, it is not set to that value. (Only the speakers of
(Only the speakers of the main unit)
When it is set to 59 or less, the number is displayed and the volume bar is not displayed during operation in the ordi-
nary mode.
VOLUME can be abbreviated to VOL.
In the adjustment process, the volume can be set as desired regardless of this setting.
Volume high/low (VOL+/-) (Both R/C and main unit)
Mute (MUTE)
Volume Fixed is prior to Volume Maximum Level.
Even if the above disabled keys are operated, the volume is not displayed.
VOLUME can be abbreviated to VOL.
In the adjustment process, the volume can be set as desired regardless of this setting.
When Volume Fixed is set to "VARIABLE", the setting is inhibited to change.
VOLUME can be abbreviated to VOL.
Regardless of the setting contents, the process mode, inspection mode and PUBLIC_Mode Key are enabled.
Regardless of the setting contents, all keys can be used while entering the process mode, inspection mode or
PUBLIC_Mode.
Regardless of the setting contents, the start operation of the process mode, inspection mode and PUBLIC_Mode is
enabled.
Regardless of the setting contents, all keys can be used while entering the process mode, inspection mode and
PUBLIC_Mode.
When power button on R/C is pressed
No Power off by remote control.
3 – 20
LC-52XS1E/RU/LC-65XS1E/RU