Sharp LC-52XS1E Service Manual page 25

2. Remote controller key operation in adjustment process mode.
1. key operation
Remote controller key
P ( / )
VOL (+/-)
Cursor ( / )
Cursor ( / )
OK
CHP1-CHP6
Page specification (1-10item)
Line specification(1-6line)
Screen display
Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
3. Description of display
(1) Present page / number of total pages
(2) Page present title
1/ 46 [INFO]
MONITOR MAIN Version
NONITOR BOOT Version
Monitor SUB Version
FRC Version
LED A/MAIN/SUB version
CPLD/FPGA Version
EQ DATA CHECKSUM
LAMP ERROR
MONITOR SUB ERR CAUSE
NORMAL STANDBY CAUSE
ERROR STANDBY CAUSE
(5) Item name
No. Description
(1) Present page/number of total
pages
(2) Page present title
(3) Destination display
(4) Model size
(5) Item name
(6) Parameter
Main unit key
Moving an item (line) by one (UP/DOWN)
P ( / )
VOL (+/-) Changing a selected item setting (+1/-1)
— Turning a page (PREVIOUS / NEXT)
— Changing a selected line setting (+10/-10)
— Executing a function/ canceling a test pattern.
W/B adjustment check. It is a BETA setup about the gamma value in each adjustment point. It is off
again in the same key pressing. *Other key input is invalid in the on condition. However, it shall be
effective when other Point keys (CHP1-CHP6) are pressed.
It jumps to the pressed page. The cursor position after it moves selects the first line
The cursor moves to the pressed line.
— It is considered as monitor process mode OSD all OFF.It displays it again by another key pressing.
(3)Destination display
INPUT1 AUTO
1.10 (E 2008/09/03 1)
1.01
1.05
71716531
0808236501/1.0.0/1.0.0
a3 / 46
ROM
0
00 00 00 00
0
1) 0
4) 0
2char/2char Decimal Number mark.
Max. 15 char "[" "]".
EUROPE/RUSSIA/SWEDEN
65/52
Max. 30 char
Max. 60 char
Remote controller key Main unit key Function
(4) Model size
EURO 65E_UNDER[0]
2) 0 3) 0
0H 0M 0H 0M 0H 0M
5) 0
0H 0M 0H 0M
Display specification
3 – 2
LC-52XS1E/RU/LC-65XS1E/RU
Process menu header