Sharp LC-52XS1E Service Manual page 12

LC-52XS1E/RU/LC-65XS1E/RU
3. Removing of connectors
1. Disconnect the following connectors from IF Unit. (LE, PD, PE, LW, KM, LB, FR, SP, US)
2. Disconnect the following connectors from USB Unit. (US)
3. Disconnect the following connectors from SP-T Unit. (SP)
4. Disconnect the following connectors from A3C LCD T-CON Unit. (RA, LW, LB, LC)
5. Disconnect the following connectors from MAIN POWER Unit. (PD, PI, PE, PS1, ACM)
6. Disconnect the following connectors from SUB-1 POWER Unit. (PS1, PS2, LA1, AC1, ACM)
7. Disconnect the following connectors from SUB-2 POWER Unit. (PS2, LA2, AC1, AC2)
8. Disconnect the AC2 connector from AC INLET Unit.
9. Disconnect the KM connector from KEY Unit.
10.Disconnect the AC connector from DC OUTPUT Unit.
MAIN POWER Unit
IF Unit
USB Unit
[US]
SP-T Unit
DC OUTPUT Unit
SUB-1 POWER Unit
[PI] [PE]
[PI]
[PD]
[LE]
[ACM]
[RA]
[LW]
[LB]
[SP]
[LC]
[AC]
[KM]
[LE]
IF Unit
[US]
[LA1] [PS2]
[PS2] [LA2]
[PS1]
[ACM] [AC1]
[AC1]
[AC2]
A3C LCD
KEY Unit
T-CON Unit
[PD]
[PE]
[LW]
[FR]
[LB]
[KM]
[SP]
2 – 3
[LA1]
[LA2]
SUB-2
POWER Unit
[AC2]
AC INLET Unit