Part Identification - Pro-Form 475 E User Manual

PART iDENTiFiCATiON CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LiST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included, if a part is missing, please call 1=888-533-1333.
[
M8 Washer MIO Split MIO Curved
(63)-8 Washer (80)-2 Washer (62)-2
M8 Locknut
(60)-6
MIO Washer
(64)-6
MIO Locknut
(77)-1
M8 x 20mm
Screw (61)-8
M8 x 38mm Bolt
(59)-6
MIO x 53mm Screw (73)-1
M4 x 16mm
Screw (56)-4
M6 Bolt Set (67)-2
M10 x 20mm
Screw (74)-5
MIO x 39mm Screw (75)-2
M10 x 60mm Bolt (72)-1
\
MIO x 70mm Screw (76)-2
5