Pro-Form 475 E User Manual page 11

11. Apply grease to a Short Axle (19).
Slide the Right Pedal Arm (9) onto the Right
Roller Arm (7) as shown, and insert the Short
Axle (19) into both parts.
Then, tighten an M8 x 20mm Screw (61) with an
M8 Washer (63) into each end of the Short Axle
(19) at the same time.
Attach the Left Pedal Arm (10)to the Left
Roller Arm (8) in the same way.
11
10
12. The Console (30) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together, iMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic com-
ponents. Remove the battery covers from the
back of the Console, and insert batteries into the
battery compartments. Make sure to orient the
batteries as shown by the diagrams inside
the battery compartments. Then, reattach the
battery covers.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console,
use only a manufacturer=supplied regulated
power adapter. Plug one end of the power
adapter into the receptacle inside the battery
compartment on the console; plug the other end
into an outlet installed in accordance with all
local codes and ordinances.
12
Battery
Cover
\
Battery
Cover
ptacle
11