Chapter 3: Operating Instructions; Display Control Panel Features - Star Trac E-TR Owner's Manual

O
PERATING
Operating the STAR TRAC E SERIES TREADMILL is very easy. Simply step onto the running belt, press Q
ing or running naturally.
Learning the features and incorporating the STAR TRAC E SERIES TREADMILL into your members' fitness programs is just as easy.
In this chapter, you will learn the display function and how to get the most out of every STAR TRAC E SERIES TREADMILL workout.
IMPORTANT: Before operating the treadmill, you must be familiar with the following equipment limitations and safety features.
I
Maximum Weight: Your STAR TRAC E SERIES Treadmill is designed for a maximum user weight of 500 lbs/226 kg. DO NOT
exceed the maximum user weight.
STOP
SWITCH
I
Emergency Stop: In case of emergency, press the S
I
Immobilizing the Running Belt: To power the unit, set the ON/OFF power breaker to the ON position. To turn the unit off, set the
ON/OFF power breaker to the OFF position. When the unit is turned off, movement of the running belt is prevented.
I
Safety Lockout Feature: Allows you to lock out the treadmill. When the treadmill is locked, the display shows the message
"TREADMILL LOCKED, ENTER ID TO UNLOCK". The user must press "0", enter a 5-digit ID number (default=12345), then press
ENTER to unlock the treadmill. The treadmill will then operate as normal (NOTE: The treadmill will lock back up if it is idle for 30
seconds). Use the LOCK OUT option in MAINTENANCE SETTINGS to enable/disable the lock out feature; use the LOCKOUT ID
option to change the default ID (see Chapter 8).

DISPLAY CONTROL PANEL FEATURES

Your STAR TRAC E SERIES TREADMILL is equipped to provide
you and your users unlimited exercise opportunities. Experiment with
its features to find the right combination for your fitness regimen. The
Display panel shown to the right provides the operating controls and
display elements described in the following paragraphs:
Q S
UICK TART
belt moving using a default weight of 155 pounds
and a time limit of 99 minutes. Q
allow you to manually operation of the treadmill
too. The Q
"Enter" key in programming modes.
S Key: Pauses your treadmill when pressed
TOP
once. Ends your workout when pressed twice.
STAR TRAC E SERIES TREADMILL O
I
NSTRUCTIONS
i
PULSE TM
Key: Starts your treadmill running
UICK
S key also serves as an
UICK TART
' M
WNER S ANUAL
STOP
KEY
on the display, or the stop switch on the left-hand side rail.
TOP
MESSAGE
WINDOW
S will
TART
PROFILE
DISPLAY
PRESET
PROGRAMS
KEYPAD
QUICK
START
C
HAPTER
3
S , and begin walk-
UICK TART
ON / OFF
POWER BREAKER
FAN CONTROL
KEYPAD
MOTIVATIONAL
i
PULSE TM
TRACK
INFORMATION
WINDOWS
NUMERIC
KEYPAD
STOP
KEY
17