Star Trac E Series Operation Service Menu

Hide thumbs Also See for E Series:

Download this manual

The following procedure will show you how to enter the Diagnostic Mode of the all E Series Embedded Products

Step 1

Start on the default screen (Fig. 1)

Step 2

Press and hold the VOL '+' key and the CH '+' key and the number '3'

key on the keyboard at the same time to enter the Service Menu (Fig.

2).

VOL

Step 3

Press the number '3' key on the keyboard or touch "Diagnostic Mode".

STAR TRAC FITNESS

Diagnostic Mode

E Series: All Embedded Units

Service Menu

Fig. 1

Fig. 2

635-4116 Rev: A

Page 1 Service Menu Diagnostic Mode E Series: All Embedded Units The following procedure will show you how to enter the Diagnostic Mode of the all E Series Embedded Products Step 1 Start on the default screen (Fig. 1) Fig. 1 Step 2 Press and hold the VOL ‘+’...
Page 2 Monitor” box at the lower left hand side of the screen. Then, “No Key” will be displayed (Fig. 4). Fig. 4 Step 6 Example 1 ‘Quick Start’ key was pressed (Fig. 5) Fig. 5 STAR TRAC FITNESS 635-4116 Rev: A...
Page 3 Step 9 To test the Contact Heart Rate system, grab the heart rate grips. The current measured heart rate will be displayed in the HR Monitor window with the word “Contact” (Fig. 8). Fig. 8 STAR TRAC FITNESS 635-4116 Rev: A...
Page 4 Fig. 9 To exit the Diagnostic Mode, use one of your fingertips and gently touch ‘Exit’ on the touch screen or press the ‘OK’ key on the keypad. Step 11 Test unit for proper function. STAR TRAC FITNESS 635-4116 Rev: A...