Star Trac E Series Service Bulletin
Heart rate test
Hide thumbs
Also See for E Series:
- Operation manual (42 pages) ,
- Install manual (7 pages) ,
- Calibration & setup (7 pages)
Advertisement
Quick Links
Service Bulletin
E-Series Heart Rate Test
Applies to: E-TR & E-TRx (LED Display only)
The Heart Rate Test in the Maintenance Mode of the E Series treadmills can be
Latest Rev.
used to verify that the contact or Polar telemetry heart rate is working.
Engaging Maintenance Mode
From the idle screen (unit is powered on but not in a program), press and hold
,
,
.
The word "MAINTENANCE" will temporarily show in the marquee window and then go to the first
setting.
Entering the Keypad Test
Press the
until the marquee window reads "HEART RATE TEST".
To activate the test press
.
Page 1
637-1386 Rev. C
Advertisement
Related Manuals for Star Trac E Series
Summary of Contents for Star Trac E Series
- Page 1 E-Series Heart Rate Test Applies to: E-TR & E-TRx (LED Display only) The Heart Rate Test in the Maintenance Mode of the E Series treadmills can be Latest Rev. used to verify that the contact or Polar telemetry heart rate is working.
- Page 2 Service Bulletin To test the contact heart rate, grasp the contact heart rate grips. Note: Do not grasp tightly or wrap fingers completely around the grip. This may cause the readings to be inaccurate. After a few seconds, the contact heart rate reading will be displayed on the marquee. To test the Polar heart rate, use a Polar strap (or simulator for testing only).