Advertisement
Available languages
Available languages
HOWTO usz
33
Custom Program
If you have a special combination
of settings that you
use frequently,
you can save these settings as a custom
program..
To save a custom program:
1. Turn on the dryer and turn tile cycle selector knob to
select the desired cycle.
2. Use the cycle setting buttons
to adjust the settings for
that cycle.
3. Press the cycle option
button(s)
for the option
you
would
like to add. A confirmation
message will be
shown in the display.
4. Press and hold the Custom Program button
for 3
seconds.
r __ NOTE
'-,
You may save only one custom program
at a time.
Pressing and holding
the Custom Program button
will
,. overwrite
any previously
saved custom program.
To recall a custom program"
1. Turn on the dryer.
2. Press the Custom Program button.
3. Press the Start/Pause button
to start the cycle.
Steam
Functions
To fill the steam feeder
1. Open the lid,
\
2. Lift out the steam feeder.
3. Fill the steam feeder to the MAX line with water.
Water
ONLY
Steam
4. Place the steam feeder in the square barrel, then
cover the lid.
,,------@NOTE
Before using a Steam Cycle, the steam feeder must
be filled with water up to the MAX line. If not, the
will be displayed. Make sure that the steam feeder is
filled with water or the drawer is fully closed. Turn the
dryer offthen
restart the steam cycle.
Only use water. Do not fill the steam feeder with
foreign
substances, rinse agents, or detergents.
Before moving the dryer, make sure the steam feeder
is empty.
Do not use distilled water; the water level sensor in
the steam generator
will not work.
Be careful to put the Steam Feeder otherwise
water
will be overflow.
Wipe up any spilled water around the Steam Feeder
and the drawer before starting the dryer.
Do not fill the steam feeder with hot water (over
86°F/30°C).
_WARNING
. Do not fill the steam feeder with
liquids
such as
gasoline, dry-cleaning
solvents,
or other flammable
or explosive substances.
Failure to follow
this
warning can cause serious injury or death.
. Do not drink water
from the steam feeder.
Failure to
follow this warning
can cause serious injury or death.
Advertisement
