Advertisement
Available languages
Available languages
How TOUSZ 29
HOW TO USE
Opera¢ing
the
Dryer
Lint
Filter
Clean the Lint Filter
If the lint filter has not already been cleaned, lift out tile filter and remove the
lint from the last load. This will help ensure the fastest and most efficient
drying
performance.
Load the Dryer
Load the dryer with the wet laundry from the washer, If the load is extra large,
you may need to divide
it into smaller loads for proper performance
and fabric
care.
Turn On the Dryer
Press the Power button to turn on the dryer, The cycle LEDs will illuminate
and
a signal will sound, if turned on. Refer to page 10.
Select a Cycle
Turn the cycle selector knob either direction
until the LED for the desired cycle
is on. The preset temperature,
dry level, and option settings for that cycle will
be shown. Refer to page 32. Default settings for the selected cycle can now be
changed if desired.This
can be done using the cycle modifier
buttons
as shown
on page 34. Cycle options
can be added using the option
buttons
as shown on
page 34-35.
f.......
@ NoTE
Not all options
or modifiers
are available on all cycles. A different
chime will J
sound and the LED will not come on if the selection
is not allowed.
Begin the cycle
Press the Start/Pause
button
to begin the cycle.The cycle can be paused at
any time either by opening
the door or by pressing the Start/Pause button.
If
the cycle is not restarted within
4 minutes, the dryer will shut off and the cycle
settings will be lost.
End of Cycle
When the cycle is finished, the chime will sound if it is set. Remove your
clothing
from the dryer immediately
to reduce wrinkling.
If Wrinkle Care is
selected, the dryer will tumble
briefly every few minutes to help prevent
wrinkles
from setting in the clothes.
Advertisement
