Advertisement
Available languages
Available languages
INSTALLATION
INSTRUCTIONS
15
Reversing
the
Door
_WARNING
• To avoid damage
to the dryer or the door, support
the door with a stool or box that fits under the
door,
or have an assistant support the weight of the
door,
• Avoid dropping
the door to avoid damage
to the
door or the floor.
THE DRYER DOOR ISVERY LARGE AND HEAVY. Failure
to follow the instructions
below can result in damage to
the dryer, property
damage or injury to persons.
1. Open the door and remove the two plastic hole caps
on the catch side by gently prying up with a flat blade
screwdriver.
Save these for step 6.
Hole cap
2. While
supporting
the door,
remove
the 4 screws,
two
from
each hinge.
Set the door
aside
face
down
on a
protected
surface
to prevent
damage
to the
door
or
the work
surface.
3. With the door on a protected
surface, remove the 16
screws on each side of the door and lift off the inner
door frame using a flat blade screwdriver.
Remove the
latch hook and blank and move them to the opposite
side.
4. Remove the 4 screws securing
the hinges to the door
frame. Remove the two plastic cover caps. Reinstall
the hinges and cover caps on the opposite
sides from
which they were removed.
5. With
the hinges
and
cover
caps
in the new
locations,
remount
the
inner
door
frame
onto
the outer
door
frame
with
the screws
removed
in step
3 above.
i
i
i
i
i
i
i
i
i
i
I
I
I
"
|
|
_" H
6. Reinstall the door with the screws from steps 1,2.
6. Test
the
swing
of the door
to make
sure
the
hinges
and
latch
are properly
aligned
and
that
the door
closes
and
latches
correctly.
:;4
[
,
,,
,
Advertisement
