Table of Contents
Advertisement
Items
Time S
erver
Time Zone
Set Local Time
Dial Rule
Dial Prefix
End Dial Char
Ringing Time (Sec)
Hook-On Tone Delay
(Sec)
Select Signal Tone
LAN Interface Login
Web Login Port
SysLog Server
Log Level
Upgrade Software
1. Choose upgrade file type from Up
Upgrade Config File
2
. Press [Bowser] to browser file.
3.
Press [Update] to star
Descriptions
Set Time Serve
r IP Address. If use NTP time, IP Phone will get time
from the special Server. You can use the default setting if you do not
know it.
Set a Time Zone. The default setting is GMT+09:00
Set the local time.
If or not enable Dial Rule. The settings of Dial Rule is in Advanced
Settings/Dial Rule page.
The prefix of your dialing
Select "#" or "*" as the end char of dialing.
Set the ringing time,default is 60s.
This value set the duration of busy tone before warning hook-on tone
appearing.
Select signa
l tone standard for different nations and zones.
If or not enable LAN Interface Login.
Login port, default is 80 in IP Phone
Set the SysLog Server ip address or domain name for IP Phone, IP
Phone support local and remote Syslog, If you set Syslog Sever to an
IP address or domain, the syslog will be sent to this server; otherwise,
syslog information will be local, and you can see the system log in
System Log page. It records IP Phone's important events according
syslog log level.
IP Phone have
five Log level: None/Error/Warn/INFO/Debug, the
priority changes from left to right, left is the lowest, right is the highest;
the higher priority, the more information in syslog.
grade Software, Upgrade Ring Voice, Upgrade Dial Plan and
t upgrading.
number.
to
42
Advertisement
Table of Contents
