1. Manuals
  2. Brands
  3. Planet Networking & Communication Manuals
  4. IP Phone
  5. VIP-155PT
  6. User manual

Planet Networking & Communication VIP-155PT User Manual

Planet technology sip ip phone user's manual
Hide thumbs Also See for VIP-155PT:
Table of Contents

Advertisement

Quick Links

Download this manual
SIP IP Phone
VIP-155PT User's manual

Advertisement

Table of Contents
loading

Related Manuals for Planet Networking & Communication VIP-155PT

Summary of Contents for Planet Networking & Communication VIP-155PT

  • Page 1 SIP IP Phone VIP-155PT User’s manual...
  • Page 2 Copyright Copyright (C) 2006 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
  • Page 3 Revision User’s Manual for PLANET SIP IP Phone: Model: VIP-155PT Rev: 1.0 (October, 2006) Part No. EM-VIP155PTV1...

  • Page 4: Table Of Contents

    LAN IP address configuration via web configuration interface...12 WAN IP address configuration via web configuration interface ...13 Chapter 3 Web Configurations ... 15 Configuring and monitoring your VIP-155PT from web browser ...15 Overview on the web interface of VIP-155PT ...15 Manipulation of VIP-155PT via web browser...15 Current State ...16...
  • Page 5 Upload configure file...54 Network Diagnosis...54 Reset to factory default ...55 POTS Mode (Safe mode)...55 Appendix A ... 56 FAQ ...56 Appendix B... 57 Voice communications ...57 Peer to Peer (P2P) Mode ...57 Proxy Mode ...58 Appendix C... 61 VIP-155PT series Specifications ...61...

  • Page 6: Chapter 1

    Telephony Service Provider (ITSPs) communications and interoperate VoIP hardware and systems form othe major third party vendors with the traditions of PLANET VoIP family. As feature-rich IP Phones, the VIP-155PT fulfill your needs. They are simple to use, and have additional features such as built-in PPPoE/DHCP clients, password-protected machine management, large LCD menu display, hands-free speakerphone, last number redial, incoming message indicator, and user-intuitive web administration system.

  • Page 7: Package Content

    The VIP-155PT is capable of handling both peer-to-peer and SIP proxy registration, authentication to interact with major SIP gateway/IP Phone in the market. The VIP-155PT offers the most flexibility and interoperability with PLANET and 3rd party VoIP vendors, allowing the deployment of both simple and complex VoIP networks such as ITSP, PC-to-Phone/Phone-to-PC or enterprise VoIP environments.

  • Page 8: Physical Details

    Physical Details The following figure illustrates the front/rear panel of VIP-155PT. Front View and Keypad function Keypad Description LCD Display Speed Dial No.1~No.9 Sysinfo Out call Send Front Panel of VIP-155PT Menu and all status shall be displayed for users.
  • Page 9 Press to dial the last dialed number when the IP Phone is Redial off-hooked. The green light goes on when power on. The green light goes on-off when there is an incoming call. Message The light goes constant on when there have voice message (Proxy Mode.) To switch between the usage of the handset and the speaker Handfree...

  • Page 10: Rear View

    PoE device will burn up the VIP-155PT permanently. Either one power-source is allowed. Please make sure only one power source is applied to the VIP-155PT. Rear Panel of VIP-155PT RJ-45 connector, to maintain the existing network structure, connected directly to the PC through straight CAT-5 cable RJ-45 connector, for Internet access, connected directly to Switch/Hub through straight CAT-5 cable.

  • Page 11: Chapter 2 Preparations & Installation

    Microsoft Internet Explorer 4.01 or higher with Java support Default LAN interface IP address of VIP-155PT is 192.168.0.1. You may now open your web browser, and insert 192.168.0.1 in the address bar of your web browser to logon VIP-155PT web configuration page.

  • Page 12: Lan/Wan Interface Quick Configurations

    LAN/WAN Interface quick configurations Nature of PLANET VIP-155PT is an IP Sharing (NAT) device, it comes with two default IP addresses, and default LAN side IP address is “192.168.0.1”, default WAN side IP address is “172.16.0.1”. You may use any PC to connect to the LAN port of VIP-155PT to start machine administration.

  • Page 13: Wan Ip Address Configuration Via Web Configuration Interface

    After logging on machine with username/password (default: root / null), browse to “Network” --> “WAN Config” configuration menu, you will see the configuration screen below: Enable this option to switch to bridge mode. VIP-155PT won’t assign IP for its LAN port in bridge mode and its LAN and WAN port will be in the same network.
  • Page 14 Connection Type Static IP DHCP PPPoE Please consult your ISP personnel to obtain proper PPPoE/IP address related information, and input carefully. Hint If Internet connection cannot be established, please check the physical connection or contact the ISP service staff for support information. Data required.

  • Page 15: Chapter 3 Web Configurations

    Provides user input data fields, check boxes, and for changing machine configuration settings Displays machine running configuration To start VIP-155PT web configuration, you must have one of these web browsers installed on computer for management Netscape Communicator 4.03 or higher Microsoft Internet Explorer 4.01 or higher with Java support...

  • Page 16: Current State

    Current state information Network VOIP Phone Number VIP-155PT main page Shows the WAN and LAN port connecting state and current settings Part show the working state of VoIP, you can see whether IP Phone has registered the public sip server...

  • Page 17: Wan Config

    ISP provider check with your ISP provider check with your ISP provider If there is DHCP server in your local network, VIP-155PT will automatically obtain WAN port network information from your DHCP server. VIP-155PT will automatically obtain WAN port network information from your ITSP if PPPoE setting and the setup are correct.

  • Page 18: Lan Config

    IP for its LAN port in bridge mode and its LAN and WAN port will be in the same network (This setting won’t take effect unless you save the config and reboot the device) LAN IP address of VIP-155PT Default: 192.168.0.1 LAN IP address of VIP-155PT Default: 255.255.255.0...
  • Page 19 Setting page of public SIP server. Field Register Server Addr Register Server Port Register Username Register Password Proxy Server Addr Proxy Server Port Proxy Username Proxy Password Domain Realm Local SIP port Phone Number Register Expire Time Detect Interval Time User Agent Description Register address of public SIP server...

  • Page 20: Dhcp Server

    DTMF Mode Server Type RFC Protocol Edition Auto Detect server Enable Register Enable Pub Outbound Proxy DHCP Server DHCP server manage page. User may trace and modify DHCP server information in this page Field DNS Relay Lease Table Name Lease Time DTMF signal sending mode: support RFC2833, DTMF_RELAY (inband audio) and SIP info It could support different SIP Proxy providers...

  • Page 21: Nat

    Start IP End IP Netmask Gateway Notice: This setting won’t take effect unless you save the config and reboot the device Advance NAT setting. Maximum 10 items for TCP and UDP port mapping. Field Description Enable/Disable IPSec ALG IPSec ALG FTP ALG Enable/Disable FTP ALG PPTP ALG...

  • Page 22: Net Service

    LAN device IP for port mapping Inside IP LAN device port for port mapping Inside Port Outside Port WAN port for port mapping Click to add new port mapping item and Net Service Field HTTP Port Telnet Port RTP Initial Port RTP Port Quantity Notice: Settings in this page won’t take effect unless save and reboot the device.
  • Page 23 Firewall setting page. User may set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices to access the internet. Access list support two type limits: input_access limit or output_access limit. Each type support 10 items maximum.

  • Page 24: Qos Settings

    Dest Addr Src Mask Des Mask QoS settings IP PHONE IP phone implement QoS based on 802.1p, The QoS is used to mark the network communication priority in the data link/MAC sub-layer. IP Phone will sorted the packets using the QoS and sends it to the destination.
  • Page 25 This page is used to set the private sip server, stun server, and back up sip server information. STUN Server setting: Field STUN Server Addr STUN Server Port STUN Effect Time Enable SIP STUN Public Alter Register: Public Alter server provide redundancy for the public server, if the public server is unavailable, IP PHONE will use the alter server, and switch back to the public server when it is available.

  • Page 26: Digital Map

    User can register two sip servers: Public sip server and private sip server.these two sip servers are independent from each other and running in the same time. For how to configure private sip server. Please refer to Digital Map Digit map is a set of rules to determine when the user has finished dialing. IP Phone support below digital map: Digital Map is based on some rules to judge when user end their dialing and send the number to the SIP_Config...

  • Page 27: Call Service Settings

    VIP-155PT support following digital map: Field Description End With “#” Use # as the end of dialing Fixed Length When the length of the dialing match, the call will be sent Specify the timeout of the last dial digit. The call will be sent after...
  • Page 28 User configure the value add service such as hotline, call forward, call transfer, 3-way conference call .etc in this page Field Hotline Call Forward No Disturb Description Configure hotline number. IP PHONE immediately dials this number after hook-off if it is set Forward when busy: select Busy in the Call Forward Field, and Key in the destination phone number in the Forward Number.

  • Page 29: Voice Record

    Playing No Answer Time Black List Limit List Voice Record VIP-155PT provides record function. With this function, user may record three VoIP message and one local message. Field Enable Voice Record Enable this to ban outgoing calls Check the Enable Call Transfer.

  • Page 30: Mmi Filter

    Incoming Record Playing User-Defined Voice Record local message: User may use local message to leave message to other local users. Please refer the Record button function as below: Level1 Level2 Received Record Playing Local Play User define Switch Play MMI Filter MMI filter is used to make access limit to IP PHONE IP phone.

  • Page 31: Dial-Peer Settings

    Handfree Volume Handdown Time G729 Payload Length Dial-Peer Settings VIP-155PT provide flexible dial rule, with different dial-rule configure, user can easily implement the following function: ----Replace, delete or add prefix of the dial number. Description select the prefer CODEC; support ulaw, alaw,G729 and G7231 5.3/6.3...
  • Page 32 ----Make direct IP to IP call ----Place the call to different servers according the prefix. You can click “Add” to add a new dial rule. Below is the detail setting of the dial-rule: Field Description The Number suit for this dial rule, can be set as full match or prefix match.

  • Page 33: Config Manage

    Field Description If the call starts with 2, the first 2 will be deleted, and the rest number will be 2T rule sent to private SIP server. If the call starts with 3, the first 3 will be deleted, and the rest number with be 3T rule sent to public SIP server.

  • Page 34: Ftp/Tftp Update

    FTP/TFTP Update Backup: Back up configure file to your FTP/TFTP server. * configure use .cfg extension. Auto update: IP PHONE IP phone support FTP and TFTP auto update. The gateway will auto obtain the configure file from your update server if configured. To obtain the original configure file, you can use the FTP/TFTP back up as describe above.

  • Page 35: Account Manage

    Configure file version was in the <<VOIP CONFIG FILE>> and <GLOBLE CONFIG MODULE> ConfFile Version Example: Gateway original version is: <<VOIP CONFIG FILE>>Version:1.0000 <GLOBLE CONFIG MODULE> ConfFile Version：6 User may edit the configure file version to: <<VOIP CONFIG FILE>>Version:1.0007 <GLOBLE CONFIG MODULE> ConfFile Version：7 Account Manage Set web access account or keypad password of IP PHONE.

  • Page 36: Phone Book

    Fill in the transmission port. Time Set VIP-155PT could support SNTP timeset, type in SNTP Server address, Timezone and timeout fileds. And click “select sntp” to enable SNTP function. If hasn’t click “select sntp”, it also could set up time by manual.

  • Page 37: Reboot

    Reboot Reboot IP phone, some setting needs to reboot to make it works. Please always save config before reboot, otherwise the setting will return to previous setting.

  • Page 38: Chapter 4 Keypad Configurations

    Keypad Function User can configure IP PHONE through its keypad. List below is the keypad function Keypad Mode Idle mode ---- Sysinfo Idle mode Menu/OK Idle mode config mode Exit config mode Calling mode config mode Down Calling mode config mode Calling mode config mode Mute...

  • Page 39: Keypad Menu

    Calling mode Hold Calling mode Calling mode Redial Calling mode Send Calling mode No.1~No.9 Idle mode Keypad Menu User may use SET, Menu/ok, Exit, Vol+, Vol- to config IP PHONE detail setting. Press Menu/ok to enter config mode, and the default password is 123. Below list the keypad menu of IP PHONE Level 1 Network...
  • Page 40 FastCall Three Call Call-Transfer Call-Waiting Call-Forward Dial-Rule Reg Status Reg Switch Server Domain User Agent Detect-server Dtmf-mode Interval-time Swap-server RFC-version Signal-Port Stun Codec Handdown-time Dtmf-Volume Input-volume Output-Volume System Save Reboot Condition Transfer Num Transfer IP Port End With # Fixed Length Switch Length Public Reg...
  • Page 41 Set Default Other Setting Syslog Switch Server-IP Server-Port...

  • Page 42: Chapter 5

    Chapter 5 Telnet Console Introduce Basic Structure User may use telnet command to access and manage IP phone. IP PHONE adopts tree structure for telnet. Every node contains its sub-nodes or local command. User can type “help” or “?” whenever to see sub-nodes and all local command under current node. Besides local command, there are some global commands can be used in each node.

  • Page 43: Global Command

    Global Command Global command is available under all nodes, IP PHONE support following commands: Command Function chinese Set to Chinese UI clear Clear telnet screen english Set to English UI exit Return to parent-node help 1． Show help info 2． Show sub-nodes and local command history Show command history logout...
  • Page 44 delete firewall rule Example :<config-accesslist>#no entry –I/O input –index 1 Show firewall settings [disable] enable input filter [disable] enable output filter DHCP path: <config-dhcp># add DHCP rule x.x.x.x –netmask x.x.x.x –gateway x.x.x.x –dnsserver x.x.x.x _time xxx Example:<config-dhcp>#entry –name lan2004 –startip 192.168.1.2 –endip 192.168.1.254 –netmask 255.255.255.0 –gateway 192.168.1.1 –dnsserver 192.168.10.18 delete DHCP rule Example: <config-dhcp>#no entry –name lan2004...
  • Page 45 Show LAN port IP address Show NAT info Change LAN port IP address Example:<config-interface-fastethernet-lan>#ip –addr 192.168.1.10 –mask 255.255.255.0 WAN interface settings path: <config-interface-fastethernet-wan># [disable]enable dhcp client [disable]enable pppoe [disable]enable QOS Set default gateway IP Clear default gateway IP Set WAN port IP address Example:<config-interface-fastethernet-wan>#ip –addr 202.112.241.100 –mask 255.255.255.0 You need to reconnect if the WAN port has been changed.
  • Page 46 Example:<config-nat>#tcp-entry –ip 192.168.1.5 –lanport 1720 –wanport 1000 Delete TCP mapping rule Example:<config-nat>#no tcp-entry –ip 192.168.1.5 –lanport 5060 –wanport 1000 Add UDP mapping rule Delete UDP mapping rule Show NAT info Netservice path: <config-netservice># Set DNS address Example:<config-netservice>#dns –ip 202.112.10.36 _domain voip.com Set alternate DNS address Set hostname Set http access port...
  • Page 47 ---entry –number xxx –ip x.x.x.x –protocol xxx _add xxx Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _add 123(dial 100 and will send 123100 according this rule) Add number-IP bond and replace the destination with another number ---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user dial 100 and gateway will sent 100 instead) Add number-IP bond and delete the prefix of the destination number...
  • Page 48 Set prefer codec Set DTMF gain Set black list Show black list Set input volume Set outgoing limit list Show outgoing limit list Set output volume [disable]enable outgoing limit [disable]enable black list [disable]enable outgoing limit and black list [disable]enable 3-way conference Show port settings PPPoE settings path: <config-pppoe>#...

  • Page 49: Debug (Level 0~7)

    Set local SIP signal port Set proxy server Example:<config-sip-server># proxy ip 210.25.23.22 _port 5060 _user aaa _password 123456 Set register server info _password xxx Set alter proxy info _password xxx Set alter server info _password xxx [disable]enable stun server Set stun detecting interval time Set stun server ip and port Show current sip info User management...

  • Page 50: Download Configure To Flash

    Download configure to flash usage: #download tftp –ip x.x.x.x –file xxx #download ftp –user xxx –password xxx –ip x.x.x.x –file xxx Example: #download ftp –user abc –password 123 –ip 202.112.20.15 –file AG188.cfg Password usage: #password Enter new password:xxx Confirm new password:xxx Reload usage: #reload Reboot system...
  • Page 51 path: <show># show debug info Example:#<show>#debugging dhcp-server path: <show># show LAN status and DHCP server info Example:#<show># dhcp-server dial-rule path: <show># show digital-map info Example:#<show># dial-rule interface path: <show># show LAN info Example:#<show>#interface fastethernet lan show WAN info Example:#<show>#interface fastethernet wan path: <show># show arp table info Example:#<show>#ip arp...
  • Page 52 Show ip packets Stat. Example:#<show>#ip ip Show RTP packets Stat. Example:#<show>#ip rtp Show TCP packets Stat. Example:#<show>#ip tcp Show UDP packets Stat. Example:#<show>#ip udp memory path: <show># show IP phone memory Example:#<show>#memory path: <show># show NAT information Example:#<show>#nat port path: <show># show caller-ID info Example:#<show>#port callerID show dsp info...

  • Page 53: Telnet And Logout

    show current phone number Example:#<show>#port number show current port status Example:#<show>#port status PPPoE path: <show># show PPPoE info Example:#<show># pppoe path: <show># show QoS table info Example:#<show>#qos path: <show># show sip info Example:#<show>#sip udptunnel path: <show># show UDP tunnel info Example:#<show># udptunnel uptime path: <show>#...

  • Page 54: Telnet And Logout

    Password:xxx #logout Telnet and logout path: <time># ---manualset –year xxx –month xxx –day xxx –hour xxx –minute xxx –second xxx Example:<time>#manulset –year 2004 –month 10 –day 1 –hour 8 –minitute 30 –second 0 [disable]enable SNTP server Set SNTP IP address Set SNTP server timeout Set timezone (-12~+12) Show SNTP info...

  • Page 55: Reset To Factory Default

    How to enter safe mode? There will be a schedule bar in the VIP-155PT booting procedure, press # key within the first 5 seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST mode. User may change the PC’s IP address to 192.168.10.xx and telnet to 192.168.10.1 to access the VIP-155PT in...

  • Page 56: Faq

    Appendix A Q1: How many servers may VIP-155PT register simultaneously? A1: VIP-155PT is able to register two SIP servers simultaneously, and redundancy servers. User can configure the dial peer to route calls between these servers. Q2: Why the settings vanish after reboot? A2: Please go to Config Manage Save Config to save your setting always.

  • Page 57: Appendix B

    WAN IP Address (172.16.0.1) Step 2: Execute your web browser, and insert the IP address (172.16.0.1) of the VIP-155PT-A in the adddress bar. After log on machine, browse to “Dial-peer” configuration item: Step 3: Press “Add” button and fill in the below parameter, be sure to click the “Submit” button to apply settings.

  • Page 58: Proxy Mode

    Step 4: Pick up handset or press “Handfree” key from keypad of VIP-155PT-A and dial “2#”. Then the phone of VIP-155PT-B should ring. You can do the same thing to the VIP-155PT-B. If the IP address of the remote calling party is known,...
  • Page 59 Please browse machine “VoIP” “SIP Config” menu, and enable the “Enable Register” check box. Insert IP address of the remote calling party in the “Register Server Addr” field. Sample configuration screen is shown below: After these configurations, be sure to click the “Apply” button to apply settings. SETP 2: Browsing to “Dial-peer”...
  • Page 60 SEP 20 13 12:30 SETP 4: At this moment, you may pick up the handset and dial “200” to connect with extension 200 of VIP-155PT-B to start the voice communications. “Save Config” configuration item and press “Save” button “Reboot” menu and press...

  • Page 61: Appendix C

    VIP-155PT series Specifications Product Power over Ethernet SIP IP Phone Model VIP-155PT Hardware 1 x 10/100Mbps RJ-45 port Power Over Ethernet 802.3af compliant at PT model 1 x 10/100Mbps RJ-45 port LCD display 2 x 16 characters Speaker 8 Ohm/0.2 Watt speaker for speakerphone operation...

Table of Contents