Table of Contents
Advertisement
Other Settings
Other Settings include advanced settings about SIP protocol.
Items
Domain name Mode
Carry Port Information
Signal Port
Second Dial Mode
Register Refresh Interval
(Second)
RTP Port
Cancel Message Enable
Prack Enable
PING Enable
Keep-alive interval
(10-60s)
Descriptions
If or not use domain name in the SIP URI.
If or not carry Port information in the SIP URI.
The local port of SIP protocol,default is 5060.
RFC2833 Payload(>=96): You can use the default setting.
The interval between two normal Register messages. You can use
the default setting.
IP Phone will select idle port for RTP if you set "0", otherwise IP
Phone will use the value you set. Generally speaking, set "0".
When you set enable, an unregistered message will be sent
before registration, while you set disable, unregistered message
will not be sent before registration. You should set the option for
different Proxy.
The option for RFC 3262.
If this option enable, IP Phone will send SIP-PING to Server
periodically instead of sending hello packet. The send interval is
Keep-alive interval.
The interval that we send an empty packet to Proxy.
36
Advertisement
Table of Contents
