Table of Contents
Advertisement
Items
Enable DHCP Server
DHCP Start Address
DHCP End Address
Primary DNS
Secondary DNS
Lease Time
Y ou can use the default settings if you do not know the settings of DHCP Server well. Y ou only need
to enable the DHCP Server. After enabling the DHCP Server, your PC can link to Internet if you link
your PC to IP Phone's LAN and set your PC get IP automatically.
MAC Clone settings
MAC is the hardware address of network equipment. Sometimes, network providers may bind network
account with the network equipment's MAC address. So you may not pass the provider's authentication
when you use a new IP Phone. In this case, you can use MAC Clone to copy your PC's MAC address
to IP Phone's WAN.
MAC is an important parameter for network equipments, so you should make sure that the MAC is right,
in order to prevent to make IP350 unusual.
You can login IP Phone's Web via WAN if you are incautious to make it wrong. And then clone the right
MAC or resume the default settings.
Descriptions
You can use DHCP Server if you enable it.
DHCP Server Start Address. The Network Sect of DHCP Server Start
Address should be the same with the one that IP Phone's LAN.
Generally speaking, you can use the default setting.
DHCP Server End Address The Network Sect of DHCP Server End
Address should be the same with the one that IP Phone's LAN.
Generally speaking, you can use the default setting.
Primary DNS that DHCP Server will distribute. You can use the default
setting.
Secondary DNS that DHCP Server will distribute. You can use the
default setting.
DHCP Server Leave Time. DHCP will send request to continue in period
of validity. Unit is hour. You can use the default setting.
31
Advertisement
Table of Contents
