Table of Contents
Advertisement
User can view syslog in remote server, and he/she can view the syslog in Status/Syslog
webpage, too.
5) Factory Default Setting
Select enable or disable lock default function.
6) Factory Defaults
Press the Reset Factory Default button to make VIP-1000 Series default.
4.5.2 Firmware Upgrade
Steps:
Press Browse to browse the upgrade file;
Press the Upgrade button to start upgrading;
Log in web and then check whether the firmware is well upgraded by viewing the firmware
version on the Status/Basic webpage.
4.5.3 Provision
1) Provisioning allows VIP-1000 Series to realize auto-upgrading and auto-configuration.
2) VIP-1000 Series supports 3 ways to provision: TFTP, HTTP and HTTPS.
Before testing or using TFTP, user should have TFTP Server and upgraded file and configuration
file.
Before testing or using HTTP, user should have HTTP server and upgraded file and
configuration file.
Before testing and using HTTPS, user should have HTTPS Server and upgraded file and
configuration file. What's more, user should have CA Certificate (should be the same as HTTPS
Server's), Client Certificate file and Private Key file.
3) User can upload CA Certificate file, Client Certificate file and Private Key file on the Equipment
High Definition PoE/Non-PoE IP Phone
- 50 -
VIP-1000PT/VIP-1000T
Advertisement
Table of Contents
