Table of Contents
Advertisement
1. You can see your PC's MAC address in the "Current PC MAC Address" text.
2. It will copy "Current PC MAC Address" to "Cloned MAC Address" text if you click "Clone address"
button.
3. Click the "save" button, and then click the "reboot", if you login again you will see the IP Phone's
WAN MAC Address has changed.
4. Click "Cancel clone" button if you LANt to cancel the MAC Clone. You should save and reboot, and
then it will be effective.
VPN settings
The IP Phone supports the PPTP and L2TP standard VPN protocol.
Items
Enable VPN
Initial Service IP
Initial Service Port
Router Strategy
Descriptions
There are three options: Diable, PPTP, L2TP
The VPN Server address or domain name.
The VPN Server's service port.
Two options: Sip Only, ALL.
- Sip Only : means only sip message will go though VPN channel by
default, Other packet will router to LAN interface. however you can
set some static routes to VPN interface using following Router Config.
-
ALL: all packets except to VPN server will go though VPN channel,
and Router Config takes no effect.
32
Advertisement
Table of Contents
