Summary of Contents for Planet Networking & Communication VIP-2020PT
Page 1
Handset Step 2. Connecting Power System The VIP-2020PT can be powered either by external AC/DC adapter or by connecting to an IEEE802.3af/at PSE device such as 802.3af Injector / Hub or 802.3af/at POE switch. Once the VIP-2020PT is powered, the LCD screen will prompt for POST.
Page 2
Set your computer’s IP address to 192.168.0.x, where x is a number between 2 to 254 (except 1 where is being used for the phone by default). If you don’t know how to do this, please ask your network administrator. Connect your PC to VIP-2020PT PC port.