Table of Contents
Advertisement
Save & Reboot
In Save & Reboot you can save the changes you have done. If you want to use new setting in the IP
Phone, you have to click the Save button. After you click the Save button, the IP Phone will
automatically restart and the new setting will effect.
Firmware Upgrade
In Firmware Upgrade function you can update new firmware via HTTP in this page. You can ugrade the
firmware by the following steps:
Select the firmware code type, AP or DSP code.
Click the "Browse" button in the right side of the File Location or you can type the correct path and the
filename in File Location blank.
Select the correct file you want to download to the Phone Adapter then click the Update button.
For technological consideration, we've strongly suggested
Note
refering to the following upgrade methods for update your
IP Phone.
38
Advertisement
Table of Contents
