Figure E-1. Power And Configuration Module - Garmin GMX 200 Installation Manual

GMX 200 Installation Manual
190-00607-04
GMX 200 MFD GMX 200 MFD GMX 200 MFD
P2001 P2001 P2001
1 1 1
AIRCRAFT POWER AIRCRAFT POWER AIRCRAFT POWER
16 16 16
AIRCRAFT POWER AIRCRAFT POWER AIRCRAFT POWER
POWER GROUND POWER GROUND POWER GROUND 2 2 2
POWER GROUND POWER GROUND POWER GROUND
12 12 12
CONFIG MOD GND CONFIG MOD GND CONFIG MOD GND 27 27 27
CONFIG MOD CLK CONFIG MOD CLK CONFIG MOD CLK
17 17 17
CONFIG MOD DATA CONFIG MOD DATA CONFIG MOD DATA 19 19 19
CONFIG MOD PWR CONFIG MOD PWR CONFIG MOD PWR
24 24 24
NOTES: NOTES: NOTES:
1. ALL WIRES 20 AWG FOR POWER AND GROUND. BOTH POWER LEADS AND 1. ALL WIRES 20 AWG FOR POWER AND GROUND. BOTH POWER LEADS AND 1. ALL WIRES 20 AWG FOR POWER AND GROUND. BOTH POWER LEADS AND
BOTH GROUND LEADS ARE REQUIRED. BOTH GROUND LEADS ARE REQUIRED. BOTH GROUND LEADS ARE REQUIRED.
2. CONFIGURATION MODULE IS MOUNTED IN THE BACKSHELL OF THE MAIN CONNECTOR. 2. CONFIGURATION MODULE IS MOUNTED IN THE BACKSHELL OF THE MAIN CONNECTOR. 2. CONFIGURATION MODULE IS MOUNTED IN THE BACKSHELL OF THE MAIN CONNECTOR.
3. CONTACTS SUPPLIED WITH CONFIGURATION MODULE MUST BE USED FOR CONNECTING 3. CONTACTS SUPPLIED WITH CONFIGURATION MODULE MUST BE USED FOR CONNECTING 3. CONTACTS SUPPLIED WITH CONFIGURATION MODULE MUST BE USED FOR CONNECTING
CONFIGURATION MODULE HARNESS TO P2001. CONFIGURATION MODULE HARNESS TO P2001. CONFIGURATION MODULE HARNESS TO P2001.

Figure E-1. Power and Configuration Module

AVIONICS BUS AVIONICS BUS
20 AWG 20 AWG 20 AWG
5A 5A
(14/28 VDC) (14/28 VDC)
20 AWG 20 AWG 20 AWG
AIRCRAFT AIRCRAFT AIRCRAFT
20 AWG 20 AWG 20 AWG
GROUND GROUND GROUND
20 AWG 20 AWG 20 AWG
3 3 3
CONFIGURATION CONFIGURATION CONFIGURATION
BLK BLK BLK 1 1 1
MODULE MODULE MODULE
WHT WHT WHT 2 2 2
YEL YEL YEL 3 3 3
RED RED RED 4 4 4
2 2 2
Page E-3
Revision F