Jackscrew Configuration Module Installation Into A Jackscrew Backshell; B-2 Gpn: 011-00979-20 – Kit (W/Eeprom And Pins); B-3 Gpn: 011-00979-22 – Kit (W/Eeprom And Sockets) - Garmin GDU 370 Installation Manual

B.2

Jackscrew Configuration Module Installation into a Jackscrew Backshell

Tables B-2 & B-3 list parts needed to install a Jackscrew Configuration Module with pins or with sockets.
Parts for these installations are included in the 011-00979-20 and 011-00979-22 kits, which are included
in the G3X Installation Kit (K10-00017-00).
Configuration modules are to be installed in the backshells of the P732 connector for the GSU
73, and the P3701 connector for the GDU 37X designated as PFD1.
Table B-2. GPN: 011-00979-20 – Kit (w/EEPROM and pins)
Figure
Ref
Potted Module (w/EEPROM
1
and Temp.sensor)
3 4 cond. Cable harness
4
10
Table B-3. GPN: 011-00979-22 – Kit (w/EEPROM and sockets)
Figure
Ref
Potted Module (w/EEPROM
1
and Temp.sensor)
3 4 cond. Cable harness
9 Socket, Size 20, 26-30 AWG
10
G3X Installation Manual – Appendix B
190-01115-01
Description
Pins Size 22D
Pan head screw
Description
Pan head screw
Qty. Needed GPN or MIL spec
1
1
4
1
Qty. Needed GPN or MIL spec
1
1
4
1
011-02179-00
325-00122-00
336-00021-00
211-60232-07
011-02179-00
325-00122-00
336-00022-01
211-60232-07
Page B-3
Revision A