Garmin GMX 200 Installation Manual page 43

Hide thumbs Also See for GMX 200:

Table of Contents

3. Press the Next Page line select key to view additional data source selections.

a. Radar Source:

Selections: None, ART-2000, RS-181, GWX 68, RS-811A

Select source only if a radar sensor is installed. Select the ART-2000 option if the unit is

wired to an ART-2100.

b. TAWS Source:

Selections: None, TAWS8000, KGP 560

Select a source only if a TAWS sensor is installed.

c. WSI Datalink Source:

Selections: None, Port 1, Port 2, Port 3, Port 4, Port 5

Select the Port to which a WSI AV-300/350 is connected. This connection applies to the FIS

weather data. The audio portion of the AV-350 is not supported. This data source selection is

available after activating the WSI function. A WSI Activation Kit is required. To activate the

WSI function, turn the unit off and follow the instructions provided in the kit.

d. GDL69 Source:

Selections: None, Port 1, Port 2, Port 3, Port 4, Port 5

Select the port to which a GDL 69 or GDL 69A is connected.

4. Press the Main Menu line select key to return to the first menu page.

GMX 200 Installation Manual

190-00607-04

Page 5-9

Revision F

Table of Contents

Show Quick Links

Table of Contents