Toshiba NB300 Maintenance Manual page 159

4 Replacement Procedures Error! Style not defined. Error! Style not defined.
1. Confirm the location of the DDR thermal pad on the motherboard.
Thermal Pad
Figure 4.12 Confirm the location of the DDR thermal pad
2. Insert the memory into the connector at an angle of about 30 degrees.
3. Press down on the memory module so that it is secured with both memory lock latches.
4. Press the upper corners of the memory module to make sure it is secured by the metal springs.
Figure 4.13 Press the upper corner of the memory
5. Reinstall the RAM door.
6. Secure the RAM door with one M2.5x4 screw.
NB300 Maintenance Manual 4-20